04 April 2011

ShipBreaking yard: LEYAL Ship Recycling Ltd., Turkey

The Company:

LEYAL Ship Recycling Ltd. is the leading ship dismantling and recycling company in Turkey. Established in early 1980s, the Company has grown to become the owner of the largest ship dismantling facilities in the country. With approximately 5 hectares of land dedicated to ship dismantling and recycling, the company is capable of directly or indirectly processing up to 100,000 tons of both ferrous and non-ferrous metals per year. LEYAL is fully licensed for its ship recycling operations by the relevant competent authorities in Turkey, namely the Ministry of Environment, the Undersecretariat of Maritime Affairs, and the Ministry of Labour and Social Security (in Turkey 3 ministries jointly regulate the ship recycling industry).

The Company's facilities are located near the town of Aliaga on the Aegean coast, approximately 60 Km North of the port of Izmir.

LEYAL was the first Turkish ship dismantling and recycling company to apply the European Union Notification Procedure for the Transboundary Movement of Waste (EU Regulation 259/93), in the case of the dismantling of the German Navy destroyer ex-Rommel.

  • In 2006, LEYAL was awarded the ISO 9001, ISO 14001 and OHSAS 18001 certification.
  • In 2009, LEYAL was contracted by the British Navy for the recycling of 3 Type 42 destroyers (ex-HMS Cardiff, Newcastle, Glasgow).
Ship dismantling and recycling:

Ship dismantling and recycling is by definition an environmentally friendly ('green') activity. The benefit to the environment from ship dismantling and recycling is twofold;

  • On one hand it removes older vessels that would otherwise be left abandoned, polluting the seas.
  • On the other hand it provides for recyclable materials and hence achieves a far better environmental performance given the production energy efficiency, the reduction in emissions from subsequent processing, and the preservation of non-renewable resources.
The increased awareness of sustainable development gives environmentally credible companies, such as LEYAL, a competitive edge.

  • LEYAL employs a combination of afloat & landing dismantling methodology, with on land cutting taking place on concrete impermeable floor with appropriate drainage and underground effluent collection.
  • Cutting is done with a combination of torch cutting (oxy-LPG) and mechanical cutting (mobile shear).
  • A wide variety of facilities are based on site, such as the Environmental Management Centre (EMC), worker accommodation quarters, infirmary, and both open-air and specialized covered storage areas.

Ship recycling operation:

  • Once LEYAL is contracted for the recycling of a vessel, and prior to the vessel's arrival, both the local authorities and the EMC are notified. Drawing from its wide knowledge base and longstanding experience, along with the information provided by the shipowner and also drawn during the vessel's pre-demolition inspection, the Company is in a position to establish a viable ship recycling plan, also addressing issues such as waste removal and disposal.
  • Upon arrival the vessel is secured at the yard and it is checked for radiation readings and gas free condition.
  • After the local authorities issue the necessary permissions, a team of certified experts identifies hazardous substances and plans their removal and disposal.
  • Following the pre-cleaning of the vessel the main dismantling operations commence.
  • The dismantling of a vessel starts from the superstructure and upper decks.
  • Heavy lift cranes remove big sections of the vessel and place them in specialized concrete-paved zones, where the secondary cutting and material separation takes place.
  • The sections are reduced to marketable sizes using a combination of cold and hot cutting methods (LEYAL is the only ship recycling company in Turkey to employ large scale mobile hydraulic shears) and categorized based on their type and composition for further recycling.
  • Once sufficient weight is removed from the upper vessel, the keel is moved to a dedicated zone, where the remainder of the vessel is dismantled also following the above procedure.
The absence of an intertidal zone (no tides in the area in contrast to the beaching of ships of India, Bangladesh and Pakistan) means that there are clearly defined borders between the dry land work areas and the sea, preventing unwanted washing of debris to the sea.


Environmental Management:

  • To ensure proper planning for the treatment of hazardous materials on board a vessel, LEYAL employs a well-trained team of experts that inspects the vessels prior to the commencement of any dismantling operation. The role of this first team is to identify, mark and organize the removal of hazardous materials present on board the vessel.
  • A pre-demolition cleaning team is then utilized to contain and remove hazardous materials from onboard the vessels.
  • Depending on the nature of the waste, it is either immediately disposed of through the use of nationally certified disposal companies, or it is temporarily stored in dedicated storage areas, to be delivered to certified disposal firms at a later date.
  • All the waste management related operations are coordinated from LEYAL's newly erected Environment Management Center (EMC), and controlled by the regional office of the Ministry of Environment, both at the recycling facility level, the transporting company, and the disposal company level.
In recent years Turkey has made significant steps towards harmonizing its legislation with relevant EC Directives towards Turkey's preparations for EU membership. More specifically, and in relation to waste management, all the requirements and provisions of the Council Directive 91/689/EEC of 12 December 1991 on hazardous waste (OJ L 377 31.12.1991) have been introduced into the Turkish national legislation related to hazardous waste management (BLHWC), except the provision related to reporting to the Commission (Art. 8 of Directive). Moreover, the full list of hazardous waste and the concentration limits laid down in 2000/532/EC have been adopted by the By-laws of Hazardous Waste Control (BLHWC), as per Annex VI and VII, including mirror entries.

Being at the forefront, In cooperation with the a prominent European Union Technical University, LEYAL is also participating in a 4-year research project sponsored by the European Union R&D Funding Program for the development of improved alternative vessel dismantling techniques and procedures, as well as environmentally sound management procedures for the removal, temporary storage and disposal of hazardous.

Source: http://www.leyal.com.tr/

Allied Defense Recycling begins dismantling ships at Mare Island drydocks:


The front top deck of the Solon Turman has been removed as Allied Defense Recycling continues ship dismantling on Mare Island. (Chris Riley/Times-Herald)

From the highest point on the S. President, moored inside Mare Island's Dry Dock 2, a shipyard swarming with activity unfolds between recent rain showers.

The company that recently has reopened two of the former naval base's dry docks has brought its full-time employee roster up to 60, with an estimated half residing in Vallejo. Those 60 are about half way to Allied Defense Recycling's employee goal for its first year of business.

Directly in front of the President sits the SS Solon Turman, launched from San Francisco as a cargo ship in the 1960s and retired to the Suisun Bay Reserve Fleet by 1979. It is Allied's first dismantling contract with Suisun Bay Reserve Fleet keepers, the U.S. Maritime Administration.

Off to the left, the shipyard has been playing temporary host to the SS Jeremiah O'Brien, a World War II liberty "living" museum ship normally moored at San Francisco's Pier 45. Neighboring Mare Island industrial business Copper Crane and Rigging was performing contract work on the O'Brien and needed a mooring space, Allied business operations manager Jay Anast said last week.

From atop the President, Anast pointed to the buzzing ship-breaking work, saying that the first half ton of metal from that ship has been committed to be shipped to Korea for sale. The ship weighs about 17,000 tons in all, he said. Allied is trucking the iron out to barges right now, Anast said.

Although the company has toyed with shipping its metal by local rail, Anast said the current truck-to-barge setup works best for sending the material to Korea.

A buzz of activity takes place around the drydocks of Mare Island where two ships are being dismantled, and a third, the S.S. Jeremiah O'Brien, top left, has been docked for ballast work. (Chris Riley/Times-Herald)

The Solon Turman already has pieces sliced neatly from its bow and stern, with more being removed daily. Cranes on the site move back and forth, carrying the ship chunks to the nearby ground for further dismantling.

Anast said he is awaiting word on bids for four ship-dismantling contracts (for the USS Clamp, SS Sagamore, USS Bolster and USS Reclaimer) put out to bid by the Maritime Administration in December.

Also, another three ship-dismantling contracts, for the USS Point Defiance, USS Sperry and USS Thomaston, were announced earlier this month. In particular, Anast said, the Sperry should "naturally" come to Mare Island for its last days, as the submarine tender was originally launched from the shipyard in 1941.

One other Suisun Bay Reserve Fleet contract was recently awarded, for the SS Lincoln. Anast said Allied initially bid on the Lincoln's cleaning, but withdrew when the company was told the ship would need to be prioritized over the SS President. Winning the contract would have meant flooding Dry Dock 2 multiple times, Anast said. The company was temporarily prohibited from doing that by environmental agencies, as it works at installing new environmental impact mitigation measures, he said.

According to documents posted online by the Maritime Administration, the Lincoln will be cleaned in San Francisco by the BAE Systems San Francisco Ship Repair for $571,196, and sold to Texas-based All Star Metals for $675,277. Maritime Administration spokeswoman Kim Riddle said Friday that ships in the three reserve fleets nationwide are always offered for sale prior to the government agency offering to subsidize the dismantling.

Source: Times-Herald / By Jessica A. York. 28 March 2011

Bangladesh: Rebranding country's image as ship-building nation:

The industries minister announced recently that the government would soon constitute a coordination cell, comprising experts in shipbuilding sector to ensure Bangladesh-built ships perform at the highest level of safety and operational efficiency. He said if the shipbuilding industry could maintain the current level of quality and production then this sector could be Bangladesh's surest path to attainment of Middle Income Country status while re-branding country's image as a 'ship building nation' through securing bilateral trade with friendly European partners.

While delivering two ships built by Bangladesh's leading ship building company Western Marine to its German buyer, the minister said that he felt proud as the company has handed over two more ships to Germany, just after delivery of two ships four months back. It is indeed encouraging to note that shipbuilding to cater to overseas buyers is becoming a fast growing sector for Bangladesh. Already quite a number of ocean-going cargo vessels were exported and orders for more are in the pipeline. It augurs well that contribution by the sector would comprise 3.0 to 4.0 per cent of GDP by 2015, and that export earning can go up to $2.0 billion in near future.

The country's shipbuilding industry could become the third largest foreign exchange earner in less than ten years if the government provides support services of issues relating to bank guarantees, access through green channels and declaring export-oriented shipyards as export processing zones (EPZs). This was revealed in a study on shipbuilding industry in Bangladesh: current position and prospects for future growth conducted by the Bangladesh Foreign Trade Institute (BFTI), a non-profit research institution.

Technology plays a major role in the industry and the industry is required to purchase basic drawings at an estimated cost of US$ 200,000, according to the study. Considering the importance of this technology, the government may consider subsidising the acquisition of technology, for instance, by undertaking to pay a certain percentage of the cost of acquiring such technology. Currently ship builders have to import virtually all materials required, which constitutes nearly 65 per cent.

The developments are presumably encouraging in the country's new and promising shipbuilding sector. Indeed, the government should not take so much time in making it a thrust sector as India and Indonesia are increasing their own ocean-faring vessel capacities. It noted that the ship building industry in India had grown from Rs 10.17 billion in 2002 to Rs 36.57 billion in 2007 as a result of government support over those five years, with sales increasing to Rs 52.83 billion in 2008. This would otherwise indicate what an important role the government can play in setting up an, what the study pointed out, enabling environment for the Bangladeshi shipbuilding industry.

The government has already granted the industry a partial green channel status. In terms of the current provisions, no customs duties are payable on imports of raw materials and components for use in shipbuilding. However, granting full green channel status to export-oriented shipbuilders will not place any additional burden on the government. It will save the industry 0.9 per cent of the contract value. If the shipbuilding yards are declared export processing zones, it would imply that all sales made to such shipyards would be considered exports.

Following the global economic recession, traditional shipbuilding countries are gradually becoming reluctant to build small ships (weighing less than 2,500 dead-weight tonne). This has had consequently opened a new window of export opportunity for Bangladesh. Given this encouraging signals, the Bangladeshi entrepreneurs were incentivised to enter the lucrative shipbuilding industry.

The shipbuilding sector is endowed with a certain level of technical edge that allows it to participate in higher value addition in terms of production. Taking this cue, it could be assumed that while it took around 25 years for the country's garment industry to flourish and play a key role in foreign earnings, shipbuilding could do the same but in less time (in about 10 years) with higher local value addition, assuming proper facilities and policies are provided towards the development of its backward linkage industries.

Entrepreneurs see Bangladesh's good prospects of flourishing shipbuilding industry. The country's economy could witness a big progress if it catches the global shipbuilding market and finds its modest room in the international shipbuilding country club. Establishment of deep-draft ports, duty exemption for import of capital machinery, bonded warehouse facilities, special financial subsidy and providing green channel for importing raw materials to ensure healthy growth of the sector are, thus, advocated by the concerned circles. Their forecast is that 'the sector has promising chances of contributing to the economy after garments sector'.

Bangladesh has advantages like cheap labour, a presence of nearly 0.1 million skilled and semiskilled workers and industry-related educational and training institutes. A long history of maritime activity and a favourable geographical location also placed the country at a favourable position, with about 200 shipyards and workshops to cater to the domestic needs for water vessels. The country has the skilled manpower required to vitalise the ship building industry. Some of this workforce is now displaced in some parts of the world but time has come to bring them back to utilise their capability in flourishing the sector. The government needs to patronise the much prospective sector by providing them with all logistic supports. India is providing 30 per cent financial subsidy on ship building industry while Vietnam is providing 40 per cent. Bangladesh can easily turn itself into a ship exporting country from present ship breaking one by giving due attention to the industry.

The Bangladesh economy is at present dependent on a few export items. It badly needs export diversification for its sustainable growth. The shipbuilding sector has the potential to expand the country's export basket, fetching much-needed foreign currency as well as generating employment opportunities. With an aggressive marketing plan, the new breed of entrepreneurs is expected to obtain a notable slice of the 400 billion dollar global shipbuilding business. In order to meet buyers' requirements in conformity with international standards, skill development is one of the pertinent issues that both entrepreneurs and the government do need to look into, concertedly.

Finance Minister AMA Muhith said recently that the government would announce a new policy for the shipbuilding industry. The emerging shipbuilding industry will also be declared a thrust sector in the new industrial policy, as it has huge export- and job-creation potential. Shipbuilding is predominantly a technology-driven sector. In this sector, constant improvement of engineering skill keeps one ahead of the others in competition. On its part, the government is pledge-bound to extend full support to the sector through reforming or enacting new policies. This pledge has to be translated into action in order to enable the shipbuilding sector to help lift the country's image, besides earning precious foreign exchange.

skhan@dhaka.net

Source: The Financial Express. By Shahiduzzaman Khan. Dhaka, Sunday April 3 2011

Maersk Line sets new standard for ship building and recycling:

Maersk Line’s Triple-E vessel will set a new standard for sustainable ship building and recycling by introducing the most comprehensive material documentation system the shipping industry has ever seen.

To eliminate waste and ensure the safest and most efficient handling of the ship’s materials once it is removed from service, each Triple-E vessel will come with a "cradle-to-cradle passport."

This will be a living document, describing the material composition of every piece of the ship.

The term cradle-to-cradle refers to the optimal lifecycle of the materials in a product: Specifically that they should either biodegrade and be absorbed back into nature or be recycled.

Maersk Line worked with the Environmental Protection Encouragement Agency (EPEA), a German organization which specializes in the cradle-to-cradle concept, to develop the idea for its passport.

“This is about eliminating waste. We are not only investing millions of dollars in buying ships, we are also investing millions of dollars in tonnes of materials, some of which are limited resources. If we can define and locate all the materials, it greatly improves their value and reusability for future vessels, containers and more,” says Jacob Sterling, Head of Climate and Environment in Maersk Line.

“Instead of finding new materials in the ground, the cradle-to-cradle concept shows the potential for companies to meet their needs for raw materials by using their products as healthy material-banks,” says Soren Lyngsgaard, director of the EPEA in Copenhagen.

Maersk Line already has a Green Ship Recycling Unit, which has worked with a shipyard in China to safely recover and dispose of hazardous materials on more than 50 vessels in the last decade.

With the cradle-to-cradle passport Maersk Line is dramatically expanding the scope of that effort from safe and effective recycling of hazardous materials to recycling and reuse of all materials.

Maersk said it will not be easy to map all the individual parts of the world’s largest vessels and it will require much of the next two years to develop the passport in time for the vessel’s delivery.

About 98 percent of the Triple-E’s 60,000 metric tonnes is made from five grades of steel. But there is also copper, plastic, wood, glass and other minerals throughout her 400 meter length, all of them manufactured by hundreds of different vendors. All of it should be documented in the cradle-to-cradle passport.

Source: Manila Bulletin Websites and Publications. April 3, 2011

01 April 2011

2011 International Ship Recycling Market Review and Outlook ...

Gradual recovery in the world economy against the backdrop of the global scrap market in 2010 which showed the characteristics of the ship-breaking 2011 the market prospects conduct of this arti ...Gradual recovery in the world economy against the backdrop of the global scrap market in 2010 which showed the characteristics of the ship-breaking 2011 the market prospects conduct of this article for your reference.

Global: dismantling scrap prices decline

According to the British Clarkson Inc. 2010 a total dismantling of the global Fei Gangchuan about 22.3 million dwt. Of these 11.9 million dwt tanker dismantling demolition of more than 10000 dwt and 500 million dwt bulk carriers. China India Bangladesh Pakistan dismantling the four ship-breaking power 2.3 million dwt respectively 770 million deadweight tons 400 million deadweight tons and 400 million dwt four shipbreaking countrys total 18 million lorry dismantling tons (data like of the end of November 2010). Decreased due to the number of Fei Gangchuan shipbreaking in November 2010 the international shipbreaking prices continue to raise the average scrap cost of oil tankers 459 ~ $ 469 / light ton up 0.77% to 0.91%; bulk carrier ship-breaking cost of the average $ 436 / light ton up 0.23%. According to statistics in 2010 the amount will not exceed the global dismantling 2009 1014 31.5 million dwt dismantling volume decreased significantly compared with 2009 the corporation does not appear Clarkson had on the global shipbreaking industry in 2010 showed a fold increase in the over-optimistic expectations.

I trust that first of all there the situation was the beginning of the international financial crisis broke out Fei Gangchuan price is relatively low in 2010 the international price of scrap vessels compared with the same times rising to India and Bangladesh The ship-breaking oil tankers and bulk carriers in the price comparison Indias ship-breaking price of oil tankers in the 11 months of 2010 compared with 2009 the rate of increase of 38% to 74% bulk carriers up to 35% to 83%; Bangladesh State of the ship-breaking oil tanker prices rose 18% rate to 58% 16% bulk carriers ~ 56%. London brokers reported that the vessel dry bulk carriers and oil tankers in the ship-breaking prices generally range from 400 to 450 tons per light dollars and in April 2010 October and November the Indian ship-breaking price of oil tankers actually $ 470 per tonne of light high while in 2010 the international steel market is showing the tendency of the first rose and then fell. Gradual recovery in the global economy driven first half of 2010 the international steel inquire and raw material prices are significantly increased while traders and end users have begun to replenish stocks promote the steel market volume and price go. After entering May with the economic stimulus policies in some countries to phase out and the debt crisis intensified in Europe the international steel inquire growth started to decline the market prices decline more and more narrow space ship-breaking deal profits the amount of the global dismantling showing signs of fatigue. Looking back in 2010 due to the single-hull tankers has entered the stage of accelerated exit especially the first 4 months the proportion of retirement accounts for dismantling the tanker about 50% of the total.

Secondly the international shipping market before the crisis continued prosperity and new shipbuilding number of blowout growth resulting in several years of Building demolition little more than the situation and vessel the total surplus leading to the dismantling of this should be scrapped or no time dismantling the ship the ship used excessive backlog. The reason shipping companies and ship-breaking scrap cash alternative to the reality of a ship-breaking industry highlighting the role of the main promoter of red against the market trend. After 2009 a blowout of the large disassembled in 2010 fell back behind the ship-breaking in the ascribed.

China: the number of dead ship dismantling was somewhat lower

Since 2009 the domestic ship recycling industry continues to heat up the shipbuilding industry ship-breaking like the assisted enterprises have gradually increased can be said that the domestic ship-breaking industry in 2009 reached a peak of unprecedented prosperity except just in the past is no longer reproduce the 2010 2009 as the scenery. According to data released by the Chinese Ship Recycling Association as of the end of December 2010 the Chinese Ship Recycling Association dismantling all types of waste enterprises amounted to close to 300 ships 200 million tons of light representing more than 440 ships in 2009 3.23 million tons of light compared to a larger drop. The main cause of this situation the Chinese Ship Recycling Association stakeholders trust that the international prices of used boats continues to raise approaching the domestic market price of scrap even the inversion phenomenon greatly inhibits the amount of domestic ship recycling companies dismantling .

The hulk purchase more depending on available resources in the upper reaches of the ship waste and scrap steel market require for these two aspects of the downstream market. Domestic enterprises due to the time of delivery dismantling times the impact of price changes in the downstream market and the upper phase-out hulk by the high prices scrap prices are low and other downstream factors often produce economic benefits of lower scrap and even losses.

Outlook 2011: Global shipbreaking speed will slow down

Since early 2010 affected by the global economic recovery the global container fleet in 2011 a net increase of about 92 million TEU an increase of 6.4% in particular strong growth in the number of very large container ships of which more than 8000TEU capacity container ships increased by 23.2% . In 2011 the number of dry bulk carriers may be delivered to a new record high the overall capacity will increase 14% with capacity expected to exceed the total size of 600 million dwt. 2011 will be another peak year for the delivery of new vessels surplus capacity will be more serious. However the number of global oil tanker was dismantled in 2011 the growth rate will be slowed. The real recovery in the shipping market must rely on U.S. and European markets to stabilize pick up otherwise shipping market is likely to drop back into crisis that is surplus capacity may in turn will bring to market a trace of a thriving ship-breaking dawn especially in dry bulk carrier market.

Chinas shipbreaking industry in times of adversity is another popular promoter from the higher require for steel scrap. Steel consumption production has improved significantly as a key raw material iron ore prices have continued to rise leading to a surge in demand for steel scrap substitutes so that the final production is a ship-breaking industry so scrap the benefit. In recent years Chinas dependence on imported iron ore continued to improve the situation hard to change iron ore prices Xuzhang tendency has been formed. In this case the scrap as a renewable resource with low wear and tear high utilization and low pollution emissions power saving and environmental protection advantages between the main alternatives for the iron ore demand increased significantly.

Source: goopl.com’. 011-03-15